AutoTuner Original – Outil de Programmation ECU TCU Version Master avec Support OBD, Banc, Boot, Checksum, Mises à Jour Gratuites à Vie et Garantie 5 Ans

AutoTuner Tool Device Master Version is a newer style ECU programmer supporting BDM / Bench and OBD. Its also a ONE time payment device. Autotuner is characterised by its single fee package, its ease of use and high efficiency. Autotuner is a universal tool which is able to read information from most ECUs and microcontrollers available on the market in boot tricore Infineon (BSL) or via the OBD diagnostic socket.

Autotuner is being constantly improved with new reading protocols. You can freely benefit from it as soon as you start your Autotuner Software.



Product Features:

Thanks to the ECU communication optimization and its Cortex m4 processor, memory content (Dflash Eflash and EEprom) reading is ultra-fast. It then systematically performs a backup of the TriCore password online.

Autotuner is delivered with all the required accessories in a dedicated package.

All compatible cars are displayed as a list so that you can quickly and easily select the ECU you want to read.

Autotuner helps you locate the ECU or OBD diagnostic socket on the vehicle.

It then guides you step by step through the process of reading and illustrates each step with high-definition photos.

A tool is continuously updated, for free !

Autotuner tool is under 5 years warranty. Should you encounter any major problem, we will organize replacement immediately.

Autotuner can read data from most of the ECUs and microcontrollers on the market.

Checksum correction is done automatically by the tool during the writing process. There is no need to calculate the Checksum yourself.

The Autotuner datalogging feature has been designed to be easy to use. For each supported ECU, we have pre-selected a set of relevant data depending on the vehicle and manufacturer's specific parameters.

Do you want to start from a sound and up-to-date base? Start by restoring the vehicle to its original state by using the “back to stock” function.

Reading and deletion of Diagnostic Trouble Codes (DTC) that are generic and manufacturer-specific via the OBD-II socket.

With a master tool you get non encrypted files so you can modify the files by yourself or send it to any tuning files provider.

Any editing software that supports binary file can be used to modify a file read with Autotuner.

With a slave tool you read and write crypted files. These files can only be modified by a specific master. This master is a file provider designated when you buy the tool. Your slave tool is linked to this master.

Any slave tool can be remotely transformed into master tool if the following conditions are met:

Your master approves the switch (we need written approval from the current master)

You pay the price difference!

Discover the features:

1. ECU/TCU read and write
Reading and writing of engine and gearbox controllers.

2. Automatic checksum correction
Automatic checksum correction on engine map data.

3. Back to stock
Resetting a vehicle to its original condition.

Flash methods:

OBD Method
Read and write via the OBD diagnostic socket.
359 ECU/TCU already available with this method.

How it works?
1. Connect the tool to the OBD diagnastic socket
2. Turn ignition on
3. Reading and writing are performed through OBD diagnostic socket

Bench Method
This method doesn’t require to open the engine ECU. The connection is made on the outside plug of the ECU.
348 ECU/TCU already available with this method.

How it works?
1. Remove the ECU start by removing the ECU form your car engine
2. Don't open the ECU
3. Reading and writing are performed through bench

Boot Method
This method requires to open the engine ECU. The connection is made on the ECU printed circuit board (PCB).
219 ECU/TCU already available with this method.

How it works?
1. Remove the ECU
2. Open the ECU
3. Reading and writing are performed through Boot

Diagnostic methods:

Datalogs Method
Real-time measurement and recording of engine parameters via OBD diagnostic socket.
The connection is made via the OBD socket, then simply start the test to record the data. You can then view the graph online.
134 ECU/TCU already available with this method.

How it works?
1. Select the car and start dyno run
2. Stop dyno run and upload
3. Analyze and share online

DTC Method
Reading and deletion of generic Diagnostic Trouble Codes (DTC) through the OBD-II socket.
581ECU/TCU already available with this method.

How it works?
1. Select the car and connect through the OBD-II socket
2. Launch the DTC reading protocol
3. Analyze and erase DTC