3 in 1 PH TDS Temperature Meter

testeur pH précis, mesure TDS fiable, thermomètre intégré, affichage LCD clair, compensation automatique de température ATC, résolution 0.01, idéal pour eau potable, adapté aux aquariums, facile à utiliser, étalonné en usine, sonde combinée, boîtier étanche, piles incluses, lecture instantanée, maintenance simple, outil essentiel pour qualité de l'eau, capteur durable, écran rétroéclairé optionnel, plage de mesure large, certification CE

Testeur 3 en 1 pH, TDS et température avec affichage LCD 0.01 ATC pour eau potable et aquariums is a one of our 3 in 1 PH TDS Temperature Meter Tools, you can buy Testeur 3 en 1 pH, TDS et température avec affichage LCD 0.01 ATC pour eau potable et aquariums from chinaobd2.com.

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Testeur 3 en 1 pH, TDS et température avec affichage LCD 0.01 ATC pour eau potable et aquariums

• Remove the protective cap.
• Turn on the meter.
• Immerse the electrode in the solution to be tested.
• Stir gently and wait for the reading to stabilize.
• Press the "℃/"F" key,choice the C/F for measuring.
• Press the "TDS/pH"button,choice the PH or TDS for measuring.
• After use,turn off the meter.Rinse the electrode with distilled water to minimize contamination.
• Always replace the protective cap after use.

• Rinse the ph electrode first with distilled water,and suck it with filter paper(not included).
• Turn on the meter.Press the"TDS/pH"button,choice the PH for measuring.
• lmmerse the ph electrode in pH 6.86(Or pH7.00)buffer solution,gently shake the meter and wait for a stable display.
• Regulate the trimmer with the screwdriver provided until display shows"6.86"("7.00")at buffer solution temperature of 25℃.
• Rinse the ph electrode with distilled water,and suck it with filter paper(not included)
• lmmerse the pH electrode in pH4.01 or pH9.18(pH10.0) buffer solution,gently shake the electrode and waiting for the reading to stabilize.The showing value and buffer solution's ph value is within error range.
• The calibration of the instrument's pH range is now complete.

1. The ph meter should be recalibrated under following situations:
2. The meter has been used for long time since the last calibration or use.
3. The meter has been used in particularly continual conditions.
4. The utmost accuracy is required.

1. Immerse the electrode in the distilled water.Activate it about five minutes.
2. Immerse the electroder in 1382 ppm calibration solution.And stir it gently.
3. Unscrew the battery compartment cap on the top of the meter.
4. Allow the reading to stabilize and with a small screwdriverturn the calibration trimmer until the display shows“141(141x10=1410)
5. Rinse the electrode with distilled water and suck it with filter paper.
6. Immerse the electroder in 150ppm calibration solution.gently shake it and wait for a stabledisplay.The showing value and buffer solution's value is within error range.
7. Rinse the electrode with distilled water and suck it with filter paper.
8. The calibration of the instrument's TDS range is now complete.