lexia

Lexia-3 Interface works with both Citroen and Peugeot.
1.It is compatible with most of Citroen and Peugeot cars from 1995.
2. It supports read identification, read fault codes, clear fault codes, auto-scan etc. New version supports Peugeot 307.
3. It works for both Citroen and Peugeot. Now support Peugeot 307!

Top Quality Lexia-3 Lexia3 V48 for Citroen/Peugeot Diagnostic PP2000 V25 XS Evolution with Diagbox V7.76 with Original Chip is a one of our lexia Tools, you can buy Top Quality Lexia-3 Lexia3 V48 for Citroen/Peugeot Diagnostic PP2000 V25 XS Evolution with Diagbox V7.76 with Original Chip from chinaobd2.com.

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Top Quality Lexia-3 Lexia3 V48 for Citroen/Peugeot Diagnostic PP2000 V25 XS Evolution with Diagbox V7.76 with Original Chip

Lexia-3 lexia3 V48 for Citroen/Peugeot Diagnostic PP2000 V25 XS Evolution with Diagbox V7.76 Software Support Peugeot 307

Reasons to Get Lexia3 XS Evolution with Original Chip

1. Update: By CD
2. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
3. It works for both Citroen and Peugeot. Now support Peugeot 307!
4. Version: Lexia3 V48, PP2000 V25, Diagbox V7.76
5. Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
6. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
7. PP2000 have 2pcs Optocouplers

Hardware and Software Requirements

• Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed. If customer requires, we can prepare ready to work PC.
• Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and bring you much trouble.
• Better to install the software on the computer with Windows XP system.
• Better to close the Anti-virus software on your computer. Because the Anti-virus may recognize it as a type of virus, it will clear off all the software on the CD.

Descriptions of LEXIA-3/PP2000

1. It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
2. It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.
3. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Functions of LEXIA-3/PP2000

Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

1. Read Identification
   Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2. Read Fault Codes
   Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
   Program supports report printing or copy to clipboard.

3. Clear Fault Codes
   this function clears all stored fault codes and other diagnostic information.

4. Auto-Scan (Complete Car Scan/Test)
   Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values
   Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6. Actuator Test
   Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Package List of LEXIA-3/PP2000

• 1pc x Main unit with extension OBD2 cable
• 1pc x Long 9pin to USB cable
• 1pc x Short 9pin to USB cable
• 1pc x OBD2 cable
• 1pc x Instruction for Installation and Activation DVD for PP2000

Lexia-3 Setup Instruction

• PP2000 is the Software for Peugeot !
• Click ‘InstPC’ to install
• LEXIA3 is the Software for Citroen !
• Click ‘Instlex3’ to install

Otherwise it will display a warning as follow:



Lexia3 PP2000 Install Software:
Before installation, windows system needs to be English, and you cannot choose the language you want unless the language selection windows appear.

Lexia3 PP2000 Activate Software:
Under the file “LEXIA3_KEYGEN”, there are the activation pictures for lexia3 and the file “PP2000_KEYGEN” contains the activation pictures for PP2000 (PPS).
It needs registered code for PP2000 (PPS), but no registered code for lexia3, as for the registered code.

Software Display:

Lexia 3 PCB Board:

FAQ:

Q: What is the way to do more cars?
A: You can choose the S.1279 module of PPS2000 Lexia-3 Citroen Peugeot and use with lexia-3 together. Then it can do more cars you want.

Go to Buy: Top Quality Lexia-3 Lexia3 V48 for Citroen/Peugeot Diagnostic PP2000 V25 XS Evolution with Diagbox V7.76 with Original Chip